Order Online or call +44 (0)1394 462 120

Amarinth: Manufacturers of horizontal process pumps, vertical sump pumps, seal support systems and spare parts for Girdlestone pumps

API 610 oil & gas process pumps

API 610 10th : 2004 / ISO 13709 : 2003 (OH1)

Testing & NDT

Amarinth

All B Series pumps are built to stringent quality control procedures as part of our ISO9001:2000 quality management system. We offer a variety of tests and NDT to suit your exact requirements as detailed below:

Testing
Pump test Test standard Acceptance criteria Standard
Hydrostatic API 610 / ISO 13709 API 610 / ISO 13709 (1.5 X MAWP) YES
Head and flow API 610 / ISO 13709 ISO 9906 Grade 1 YES
Mechanical run - 1 hour at rated duty API 610 / ISO 13709 API 610 / ISO 13709  
Mechanical run - 4 hours at rated duty API 610 / ISO 13709 API 610 / ISO 13709  
NPSH at each test point API 610 / ISO 13709 API 610 / ISO 13709  
Noise - single point at 1m API 610 / ISO 13709 Customer datasheet YES
Vibration - FFT spectrum at each test point API 610 / ISO 13709 API 610 / ISO 13709 YES
Bearing bracket resonance API 610 / ISO 13709 Mutual agreement  

To compliment the final test we also have a number of Non Destructive Tests (NDT) that can be supplied with the pump. The following table details our standard tests:

NDT
Dyepenetrant of machined surfaces Pressure containing castings only
Dyepenetrant of cast surfaces Pressure containing castings only
Dyepenetrant of welds Drain & seal pipework (if fitted)
Positive Material Identification Excludes minor components (nuts & bolts etc)
Radiography Welds (pressure pipework)
Castings - shot plan (critical areas)
Hardness report NACE (Certain materials only - please ask for details)
Various motor tests  

To find out more about what options are available download one of our technical specification datasheets (available in the Useful links & downloads menu to the left).

A full range of Pump testing and NDT can be tailored to suit your exact requirements.

* Pressure containing parts include; volute casing, Casing cover & mechanical seal. Process wetted parts include additional shaft, impeller, wear rings & impeller hub cap, lockwasher and nut.